Thursday, November 21, 2013


The new Phi Clothing Store is now open again.  I tried making it work with the HUD offering lots of choices, but people found it too complicated.  So I'm going back to the old sale mechanism, by offering a 8 outfits, 8 fabric/colour choices for less.

LEFT click the colour to see the colour on a dress in real time, RIGHT click and BUY to get the dress.

Also, 6 new awesome mini dress styles in the Midnight Mania board.

Saturday, October 19, 2013

We Are Open!!

Save up to 25% with our Grand Opening.  Phi will be your next MESH Outfit store.  

Looking for a totally fresh and colourful look?  Add to your signature collection with high quality and unique designs and colours you won’t find anywhere else on the grid!

Phi Dresses are Free!  Phi HUD is Free!  Free Flags Pack!  Additional fabrics: Extra. 

We offer 8 outfits: 5 dresses, 2 skirts and a pair of leggings.  Each has 6 fabric patterns which you buy in packs of 8 hues, plus a HUD with 1000's of additional tints.  Come see all 384 colours on the actual MESH dresses themselves, no gimmicky picture.  What you see, is what you get!!

Thursday, October 3, 2013

Reopening Delayed

I am working hard to reopen the store, but this is more work than I thought.  It's because I'm redoing all the textures and opening with 8 designs instead of 4 ... yowza.

Wednesday, October 2, 2013

Texture Mapping v10

Yup, this is a significant improvement in texture mapping quality:  On the left is v8 and v10 on the right.  v8 is a vast improvement over v2 which is what I used in the previous store.  But v8 had problems with the alignment of textures.

v10 is what I'll be using when the store opens, hopefully tomorrow.

Sunday, September 22, 2013

Grand Opening ... but with changes

As you can tell from the picture below, I have been working on revisions to the mapping software and process.  Now in version 6, the new software creates a smoother texture mapping result.  The image below is a test dress using this revision.  As you inspect the image, look closely at the subtleties how the colours and mapped on the dress. 

The quality improvements is so significant, I have decided to re-release all my original outfits.  So when my store opens, it will have a few outfits, and then I'll increase them over time.

Thursday, September 12, 2013

Grand Reopening - October 3rd

Phi Clothing Designs is pleased to announce the Grand Reopening of our latest store on October 3rd.

We will offer 4 outfits styles, 31 colour choices and 248 dress possibilities.
  1. Tulip (12 Colours) + 2 Fatpacks
  2. Primpy (7 Colours)  + 1 Fatpack
  3. Flow (6 Colours)  + 1 Fatpack
  4. Lush (6 Colours)  + 1 Fatpack
Once the store is open, we will add these styles rapidly during the month:
    - Ginger
    Phi Clothing Designs,

    New prices

    As we get closer to the grand re-opening, I want to let you know about some price changes.  In the previous store, I charged $299 for one outfit.

    In the new store, you can only buy outfits packs of 8 for L$425.  Fatpacks of 6 outfits will be priced around "buy five get one free".  So a 6-pack will cost L$2000 and up.

    The HUD is free, and the dresses are free as well.

    This is a significant reduction in prices.  The reason for the cost reduction is to be cost competitive to other stores out there, but also to reflect an optimization in our processes.  We've eliminated much of the labor, and felt we should pass these savings on to our consumers.

    - Ginger
    Sept 12, 2013

    Wednesday, September 11, 2013

    Phi Clothing Designs - Universal HUD

    The Phi Clothing Designs - Universal HUD is a new addition to the store. With it, you can install ALL the dress design patterns, called "Outfit Pattern Packs", into it  -- being corny, "One HUD to rule them all".


    When you first attach the HUD, it will look like this:

    To install, you REZ an INSTALLER on the ground, and on the side of the box it says:

    So you click OPTIONS (ignore that it says Tulip, it tells you which dress you are really working with and will be different for everybody):

    Then INSTALL.  Note: You can install several outfits at the same time, so you don't have to do one by one.  The only limitation is that you have to be within 20m of the INSTALLER.

    Then YES:

    When you click DONE, your HUD will be updated with all the packs you installed.  Each time you put on a new outfit, you click IDENTIFY and ONLY the packs available for that outfit appear.  To get to the NEXT or PREVIOUS outfit, you click the arrows.  If you have a different outfit on, and don't click identify, clicking a fabric/texture won't change your dress colour.


    From the main HUD, you can click the TINT button to bring up this panel.  Clicking anywhere allows you to add subtle colour/tint to your outfit.  This helps you better colour match your outfits with your accessories.  Watch out though, this really only works with lighter coloured fabrics.  But it's a nice add.

    Options ::: HELP

    If you are looking at this page, you already know how to get help, but if you forget the address, use Options ::: Help to get this.  This takes you to the User Guide.

    Options ::: Make Perm

    Making an Outfit permanent is required when you want to use one of our designs or patterns in an "Second Life Outfit".  The problem is, SL uses a LINK to a dress not a copy, so if you create an SL Outfit, then change the pattern on the dress for a different purpose, your outfit will point to the changed dress, not the one you thought you created in your outfit.

    To fix this problem, you use the MAKE PERM feature.  This causes the OUTFIT to no longer be affected by the dress, and as you can read from this dialog:

    You can get a different outfit from Inventory or our store and your HUD will work with them too.

    Options ::: Drop

    This feature is used to remove textures you have installed that you don't like from the HUD.  It is usually used to remove all DEMOs but you can use it to remove any packs:

    One question you might ask is, how do I know what a particular pattern looks like from the name?  That's easy, simply rez the installer.  The top of the Installer Pack shows the patterns in the pack and there floating text identifying the name: